The Road goes ever on and on; Down from the door where it began;
Now far ahead the Road has gone; And I must follow, if I can;
Pursuing it with eager feet; Until it joins some larger way;
Where many paths and errands met; And whither then? I cannot say.

[JRR Tolkien, Lord of the Rings]

Monday 13 June 2011

Hi-Gear Blaze Titanium Stove

When Go Outdoors asked if I wanted to review an item from its range of camping equipment it didn’t take me many seconds to shoot back a ‘yes please!’ sort of a response.

When you have a poke around amongst their camping accessories you find that there are quite a few things worthy of including in a lightweight backpack. Indeed, the store has a whole backpacking stoves section, and I was particularly interested to try out the Hi-Gear Blaze Titanium Stove, which is currently being sold for a rather enticing £25.99.

Despite missing the delivery on the first attempt, I did get the item into my hands in time for my Edale jaunt, and wasted no time in ripping into the packaging.

IMG_3158 I didn’t consider our current stove (a Coleman F1 Lite) to be heavy or bulky at 78g, but this one is an incredible 48g. How ever have they managed that? Well, apart from the fact that it’s made from titanium, you’ll see from the photo that it’s not got the wide base designed to sit on top of the strongest part of the gas canister. As such, all stress is put onto the screw part of the canister and there’s nothing to stop you over-tightening the thread. Looking at a few other makes of similar lightweight stoves, I can’t see any other that doesn’t have any sort of a cross-ways stabilisation mechanism.

As you’ll also see in the photo, the stove comes in a plastic container, and at a glance you might think that would be a convenient place to keep it in your pack. Think again! The case weighs almost as much as the stove, so it was quickly discarded in favour of the little stuff-sack that came with my previous stove.

As to the other features of the stove (and let’s face it that lightweight gas stoves like this don’t have or need many features), the pot supports (which fold inwards for storage, and have no locking mechanism when folded out) are pretty much the same size as on my previous stove, so they are the right size to fit the bottom of my MSR Titan Kettle, and the control knob is long and big enough so that it can be used with heavily gloved hands.

IMG_3188

Having given it a 10-second test in the kitchen before I went, it was the only stove that I took with me to Edale and so the first time I put it to proper use was on Tuesday night on the Kinder plateau. Not just on that first use, but the following day too, it seemed to boil my water quickly considering that the gas canister was far from full. On the third day, with the remaining gas getting very low, it took an age.

“It seemed to boil quickly” and “It seemed to boil slowly, but probably no slower than my old stove” isn’t very scientific, so I couldn’t resist a slightly more controlled experiment. Conveniently, I happened to Linkhave another two half-full canisters of gas at home (6g more gas in the one than the other), so I placed one stove on top of each and boiled 400ml of tap water.

The result was that both stoves boiled the water within five seconds of each other, at around 2 minutes and 40 seconds. Both had used 4g of gas. My only other observation is that the Blaze has a wide flame pattern that goes beyond the edge of the pan, which explains why the handles got so hot (with my old stove I could still pick the pan up by the handles after it had boiled).

As it stands, I’m not just happy but impressed with this stove. Of course, three days use doesn’t tell us anything about the durability of it. We will continue to use it and if anything should prove to be amiss with it then I’ll come back to this review to note it accordingly.

Update: I didn't remain quite so impressed by this stove! Read my second review here.

4 comments:

  1. Was interested in your comments on there being nothing to prevent over tightening of the thread on the cannister. I have an identical stove bought over a year ago (but with a different name).

    I took it for an overnighter and ended up over tightening the unit so the tread unit came loose and it wouldn't get any gas.

    Fortunately it meant that I only missed a hot breakfast and I got it replaced by the supplier. The replacement has been ok but I'm always careful with it.

    ReplyDelete
  2. I notice you use a NeoAir in your Laser Comp, do still have sufficient headroom?

    ReplyDelete
  3. PhilW - Hmmm, that confirms my thoughts. I'd best be extra careful with it. A heavier stove is better than a broken stove ... but that 30g saving is so enticing!

    Geoff - You know, I've never noticed the headroom, so I guess that must mean that it's fine. But, I am only 5'5" tall, so I'm not the ideal candidate to test the sitting-up room.

    ReplyDelete
  4. I'm pleased to see you got something to review, Gayle, but that stove does look a little 'delicate'.
    Where are you off to next?

    ReplyDelete